What are the advantages of aluminum t profile?

It is generally made of aluminum and aluminum alloy by hot extrusion or rolling, so it is called aluminum t profile. If the steel is made by rolling, it is called steel aluminum profile.

07-31

What kind of machine slide carriage is it?

Machine slide carriages are generally used to support cargo. Machine slide carriages can run on overhead rails. There are many machine slide carriages. For example, to avoid excessive deflection of the chain, it can be divided into heavy machine slide carriages. An empty machine slide carriage.

07-31

Thermoforming package is more suitable for ETO gas sterilization

It has been observed that the thermoforming package which use medical Grade Paper on one side helps in faster aeration of EO Gas than laminate on both the sides. Permeability is one of the most important criteria.

07-29

Matters needing attention when selecting connector parts 5 axis cnc machining

The appearance of the connector part 5 axis cnc machining was once a sensation in the market, and has successfully changed the industry pattern.

07-29

Changes Brought by CNC Lathe to Production Methods

07-29 https://www.dasmachinery.com/

Changes Brought by CNC Lathe to Production Methods

07-29 https://www.dasmachinery.com/

Suggestions for Using Pouch Packing Machine

The pouch packing machine takes the bag automatically through mechanical aspects, and then automatically unfolds it, and then repacks it. The whole process can truly achieve an unmanned operation, because we are in the production process. Many things require automation and mechanization. packing machine is now in the direction of rapid development, the development process is not only multi-functio

07-29 https://www.focusmachinery.com/

What are the advantages of frp square tube?

FRP square tube has a variety of properties, the key to determining these properties is the base material for making FRP square tube, such as elastic modulus, insulation, heat resistance, electromagnetic wave permeability, corrosion resistance and aging resistance. performance.

07-29

What are the general requirements for CNC machining process division?

When CNC machining divides the process, it is necessary to grasp the processing according to the structure and manufacturability of the parts, the function of the machine tool of the CNC machining center, the number of parts of the CNC machining, the number of installations and the production organization of the unit.

07-27

Damping method for reducing vibratory polishing machine

Vibratory polishing machine is a very common polishing equipment on the market, vibratory polishing machine, so the name is the machine that will generate vibration. However, in some daily processing, products with high precision are often required to stop deep processing, so excessive vibration will cause processing failure.

07-27